SPSiteManager 2.5 released

Sorry for the delay, but I finally got the time to sit down and get this thing packaged up and released.

Remember, this is for WSS 2.0 and SPS2003 only.  There are no plans to build V3 versions of these tools, but features similar to these are being developed for SharePoint V3.

 

Grab it from here!

http://www.codeplex.com/SPSiteManager

– Keith

28 Replies to “SPSiteManager 2.5 released”

  1. I was hoping to see a return of the SPUserUtil in this release but alas, it was not to be. Can we expect to see that project re-released on codeplex in the near or distant future?

  2. Hello Keith, the tool is great. The only issue I have is it does not work for subsites. Unfortunately our environment is split in such a way that originally we created one top level site and started populating it with sub sites. There are over 3000 sites in one content database. The size has reached a crazy number of 500gb. Would like to break it up but avoid using SMIGRATE. Any thoughts would be greatly appreciated.

  3. Hey George, not sure what you mean by it does not work with subsites…You mean the repartition operation? If that is it, then yes, it does not have a subweb/subsite move feature…all though at one time I had planned for that. SMIGRATE is your only option in V2 for that.

  4. Hello Keith, thanks for the answer above. I do have one more. I’m currently using SPUserUtil, specifically the WSSUserUtil.exe. I’m successful in creating the xml file to store the user permissions for the subwebs but I cannot get to work when I try to apply the permissions on the new subweb. Here is what I’m doing on the command prompt:

    G:\SPUtilSuite_Release2.5\SPUtilSuite\WSS\SPUserUtil>wssuserutil.exe -o add -url “http://s3w03000:9000/ykl0/cas/F12_ITSM” -webfile G:\CompareSitesInOCC_GCC\Marc
    h072008\F12_ITSM.xml

    I get the following message:

    WSSUserUtil Version 2.5.2988.24558
    !—–>WARNING!!!!! Syntax Error
    !—–>WARNING!!!!! Required argument usermap not specified

    I do not see anywhere in the documentation that it requires a usermap.
    Thank you in advance
    George

  5. Hello Keith, as to my question above I do not see the “add” parameter. Please see below in the syntax section. As I mentioned I get the warning that I need a “usermap” argument.
    WSSUserUtil Version 2.5.2991.16236

    !—–>WARNING!!!!! Syntax Error
    !—–>WARNING!!!!! Required argument usermap not specified

    Syntax:
    WSSUserUtil -o -usermap [ -newdomain ] [ -url ] [ -usermask ] [ -webfile ] [ -portal ] [ -gcldapctx ] [ -cuou ] [ -ignoresidhistory] [ -r] [ -t] [ -xg] [ -dgo] [ -adu] [ -adshu] [ -ac]
    [ -acm] [ -act] [ -owner] [ -fixmysite] [ -verbose] [ -log] [ -asu] [ -asuonly]
    [ -portalmigrateonly] [ -weblite] [ -deleteprofile] [ -adping] [ -adpingcount ]

  6. Hey George, I think I responded to you on the alias, but just add the -usermap and specify it. Technically, it’s not needed, but I think it was a bug in the syntax checker that required it.

  7. Hi Keith, yes you did actually. I still cannot get it to work though.
    I have added -usermap everywhere but still no luck. Here is what I’m currently doing:

    G:\CompareSitesInOCC_GCC\March072008>wssuserutil -o add -url “http://s3w03214:9550/ykl0/F12_ITSM” -webfile G:\CompareSitesInOCC_GCC\March072008\F12_ITSM-we
    bs.xml

    Where should I add -usermap? Everyewhere I have I get the same message:
    !—–>WARNING!!!!! Syntax Error
    !—–>WARNING!!!!! Required argument usermap not specified

    Thanks in advance

  8. Sorry to bother you again. It seems that if you have subwebs under subwebs the permissions do not get applied. Only the first level subweb gets its permissions reapplied. Is that correct.

    Thank you

  9. George…You “ARE” running this on a V2 server right? The tool will reak havoc in a V3 environment.

    As far as it not adding on subwebs of subwebs, my first thought is “Yes it should”

    I don’t even have a V2 server up at this time to test it with, but I do plan on it over the next couple of weeks so I can get it officially re-released, and I’ll try testing it, at that time. Until them, you could manually edit and create multiple webs.xml files for each web you want to replay permissions on.

  10. Yes, it is a V2 server. I’ll do what you suggested. I also thought that it could replay the permissions on subwebs of subwebs. I’ll definitely wait for your re-release.
    Once again thank you!

  11. Hi Keith,

    I’m in a real distress, I have the same setup as George had mentioned above (WSS 2.0) i.e 1 top-level website with mulitple sub-sites. The size of the Database is 750 GB and we are finding it very difficult to manage the environment, frequent service outages, performance issues..what not…

    I’m being hounded to get this DB repartioned into multiple site collections but I’m simply dumbstuck..it may even cost my job…

    SMIGRATE will wipe off all the ACLs but this will be unacceptable to the business…

    Any ideas how do i achieve this repartioning? Your help will be much much appreciated…pls help

    1. I’ve given it consideration and actually started prototyping a new version, but don’t know that a V3/MOSS 2007 version would include every feature from 2.5, as those problems are now solved by other tools, etc.

  12. Hi Keith, I have downloaded spsitemanager 2.5 from codeplex and receive an unhandled exception relating to security when I run spsitemanager. I have local admin rights, and am a sharepoint admin, have verified that I can run stsadm -o enumsites to see if a similar command will work and have no issues…help

      1. Command: spsitemanager -o analyze -url http://localhost -sdd analysissdd.xml

        Error:
        Unhandled Exception: System.Security.SecurityException: Request for the permissi
        on of type Microsoft.SharePoint.Security.SharePointPermission, Microsoft.SharePo
        int.Security, Version=11.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c
        failed.
        at System.Security.CodeAccessSecurityEngine.CheckTokenBasedSetHelper(Boolean
        ignoreGrants, TokenBasedSet grants, TokenBasedSet denied, TokenBasedSet demands)

        at System.Security.CodeAccessSecurityEngine.CheckSetHelper(PermissionSet gran
        ts, PermissionSet denied, PermissionSet demands)
        at Microsoft.SharePoint.Administration.SPGlobalAdmin..ctor()
        at SPSiteManager.AppClass.Main(String[] args)

        The state of the failed permission was:

  13. Hi Keith,

    Is it possible to use the -repartition command on sub sites? or can it only be done on a site collection? I have a scenario where a client has a 800GB ContentDB in SPS2003 and most of the data is held in one of the team sites (700GB). I would like to be able to repartition into a number of approx 50GB contentdb’s.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s